The visible finish does not identify the system
A timber-look plank or stone-look tile can belong to different constructions and fitting methods. Ask for the manufacturer, range and installation instructions before buying supporting materials or comparing fitting quotations. A surface photograph alone may not answer those questions.
If you already own the floor, send a product label or link to the actual range. Tell the fitter whether you also bought underlay or other components. The proposed combination can be checked instead of relying on a general description such as luxury vinyl.
Both methods need a suitable base
The detailed preparation can differ, but neither system makes the existing room irrelevant. Flatness, stability, cleanliness, moisture and retained coverings need assessment against the product instructions. A rigid board or click joint should not be treated as permission to ignore every condition underneath.
Ask the fitter to explain what is established and what still needs inspecting. If an old floor is being retained, identify it clearly. If removal is planned, discuss how the exposed base and any further preparation will be assessed before the final installation.
| Decision | Glue-down LVT | Click or rigid-core LVT |
|---|---|---|
| How pieces are installed | Adhered to a prepared base | Joined as the selected floating system specifies |
| Base checks | Product-specific assessment and preparation | Product-specific assessment and preparation |
| Supporting products | Compatible preparation and adhesive system | Permitted backing or underlay and movement details |
| Design | Choose a range supporting the intended layout | Choose a range supporting the intended layout |
Consider the layout and fixed details
Pattern, borders, room connections, kitchen units and doorways all belong in the design brief. Check whether the exact range supports the appearance and application you want. Do not assume that a layout photographed in one system can be reproduced with any other product.
A floating system’s movement provisions and an adhered system’s preparation and adhesive requirements are parts of their respective specifications. Describe the finished look you want while keeping those practical differences visible in the conversation.
Compare complete proposals
Give the same room plan and product identity when asking for a quote. Include removal, preparation, supporting materials, edges and any relevant building or heating conditions. A fitting-rate comparison is incomplete if the two proposals describe different work.
Alis supplies and fits click and glue-down LVT. You can also choose fitting only when the material is already bought. Begin with the room and exact product, or ask for help choosing a suitable range before committing to the order.
Make the next step easier
Keep these details together.
- Identify the precise range and installation system.
- Have the existing base assessed for that product.
- Confirm pattern, room connections and fixed-feature details.
- Compare preparation and all agreed fitting tasks together.
More questions about this topic.
What is the main difference between click and glue-down LVT?
Glue-down LVT bonds individual pieces to a prepared base. Click systems join together and are normally fitted as a floating floor. That difference affects supporting materials, movement details and preparation even when the finished surfaces look similar.
Does click LVT always need less subfloor preparation?
No. The condition of the existing base and the selected product determine the work. A click joint or rigid-core construction does not establish that unevenness, moisture or retained coverings can be ignored.
Does glue-down LVT need the same underlay as click LVT?
The two systems should not be given the same build-up by assumption. Glue-down products need a compatible prepared base and adhesive specification, while a click range has its own supporting-layer instructions. Check the actual product before buying components.
Can click LVT be installed over existing tiles?
Some systems permit suitable retained hard floors, but that permission is conditional. Tile stability, grout lines, local differences, moisture and finished heights need checking against the exact range before overlay is agreed.
Which LVT system should I choose for a kitchen with fixed units?
Compare identified ranges with the final kitchen layout. Fixed units, islands and appliance spaces can affect the fitting sequence and details. The selected system's instructions should guide that plan rather than choosing from the visible finish alone.
Can both click and glue-down LVT be used in bathrooms?
Check the bathroom permission for each exact range. Similar appearances do not establish identical room suitability or edge details. An ordinary bathroom and a wet room also need to be considered as different applications.
Can any click LVT be fitted in herringbone with a border?
Only use a pattern and compatible components supported by the product. A photographed glue-down design does not establish that ordinary click planks can reproduce it. Confirm the range, format and border before ordering.
Is click LVT suitable over underfloor heating?
It depends on the identified range and heating system. Check the combined flooring, backing or underlay and base requirements with the actual heating guidance. A material label alone does not establish compatibility.
How do click and glue-down LVT fitting costs compare?
Alis lists standard LVT fitting at £13/m², but the complete quotation needs the actual system and base work. Compare removal, preparation, supporting materials and edges together; the headline fitting figure does not establish identical totals.
Can Alis fit either system if I buy the LVT myself?
Yes. Alis offers click and glue-down LVT fitting and accepts customer-supplied flooring. Send the manufacturer, range, quantity and any supporting products already bought so the proposed combination and room can be considered together.
Further reading and product guidance
The references below explain the relevant checks. The instructions for the actual product and property determine the specification.




