Establish whether the tiles form a suitable base
Describe any loose, cracked or moving areas and show the grout and room edges. Keeping tiles in place does not remove questions about what supports them. A finished appearance can conceal a condition that matters to the new floor.
The fitter needs the current product guidance and the state of the existing surface. Do not assume that every hard tile floor is acceptable because one manufacturer permits a particular rigid-core range over certain retained coverings.
Grout lines and local differences need checking
The width and depth of joints, lipping between tiles and other surface changes can affect the overlay proposal. The actual LVT product determines what is permitted and which preparation is required. A thicker-looking board is not proof that all irregularities can be disregarded.
Ask for the assessment and proposed preparation to be explained. Avoid selecting an extra foam layer or smoothing product as a universal answer without checking compatibility with the base, flooring system and any moisture requirements.
Look at the finished height around the room
An overlay changes the proposed build-up at doors, appliances, external thresholds and adjoining floors. Show these details even if the tiled area itself looks straightforward. A convenient option in the middle of the room can create a separate fitting issue at the boundary.
If kitchen fittings are changing, share the final layout and planned sequence. The installer needs to understand which fixed features remain and how the new product’s instructions apply around them. These are design and specification questions, not just an area calculation.
Compare overlay and removal as complete scopes
Ask what retaining the tiles actually requires and what removal would involve. Include waste, exposed-base assessment and the preparation for the chosen LVT. Neither route can be judged fairly from a single headline labour figure.
You can begin an Alis enquiry with photographs and the range you like. Make clear that overlay is an option to explore, not a confirmed condition. The measured quote should reflect the base and approach that are actually suitable for the room.
Make the next step easier
Keep these details together.
- Identify the LVT range and permission for retained flooring.
- Show loose tiles, grout, lipping and known concerns.
- Check doors, appliances and adjoining levels.
- Compare the complete preparation and removal alternatives.
More questions about this topic.
Can LVT be fitted over ceramic tiles without removing them?
Some systems allow suitable retained tiles, subject to the exact product instructions. The fitter needs to assess stability, surface differences, moisture and finished heights before confirming overlay as the installation approach.
Will rigid-core LVT hide all the grout lines?
A rigid-core label does not establish that every grout line is acceptable. Joint depth, width and surrounding surface differences need checking against the range's guidance, with any required preparation included in the proposal.
Can LVT cover tiles that are loose or cracked?
Flag those areas before choosing an overlay. Their condition and support need assessment, and the cause may matter beyond the visible crack. A new covering should not be treated as a way to make an unstable base suitable.
Do glue-down and click LVT need the same tile preparation?
They can require different surface preparation and supporting products. Specify the exact LVT first, then have the tiled base assessed against its instructions. A preparation method permitted for one system is not automatically suitable for the other.
Can I add extra underlay to cover lipping between tiles?
Do not use an improvised layer to bypass base requirements. The selected product determines permitted support and surface tolerances. Have tile edges and height differences assessed before purchasing underlay or assuming a thicker layer will solve them.
Could an LVT overlay stop appliances or doors fitting properly?
The additional build-up can affect door clearance, appliance spaces and thresholds. Show these boundaries and adjoining floors when discussing retention. The proposed finished height needs checking across the whole room, including areas beneath or beside fittings.
Do moisture checks still matter when tiles are staying?
Yes. Retained tiles do not remove the selected system's moisture requirements. Share what you know about the underlying base and any damp history so the appropriate assessment and compatible preparation can be discussed.
Can tiles stay if underfloor heating is already underneath?
Check the full proposed layer arrangement with the chosen LVT and heating instructions. Retaining tiles introduces a build-up that needs considering as a whole. Supply the system details before assuming the additional flooring is compatible.
Is laying LVT over tiles cheaper than removing them?
Compare complete proposals for both routes. Retention may need preparation and height adjustments; removal can expose further base work. Standard LVT fitting at Alis is £13/m², with the room's full scope and inclusions confirmed by quotation.
What should I send when asking whether my tiles can stay?
Send the LVT range if chosen, wide room photographs, close views of grout and any damaged areas, and images of doors and appliances. Describe known movement, heating and base information so the assessment begins with the actual room.
Further reading and product guidance
The references below explain the relevant checks. The instructions for the actual product and property determine the specification.




