ALIS FITTINGS LTDSpeak to Ali · 8am–9pm daily07704 305101
Menu

Laminate

What underlay do I need for laminate flooring?

The short answer

Use an underlay or supporting system permitted by the laminate manufacturer for the actual base and room. Carpet underlay, overlapping layers or extra foam are not automatic substitutes. Check moisture protection, product support and any heating or building acoustic requirements together. Where the flooring has an integrated layer, follow its instructions before adding anything beneath it.

Flooring from the Alis Fittings project portfolioReal Alis Fittings portfolio photography

Underlay is part of a specified floor system

The laminate and supporting material need to work together. A softer or thicker layer is not necessarily better for the joints or intended loading. Start with the floor’s product identity and the manufacturer’s installation guidance, then consider the base it will cover.

If a retailer supplied a bundle, keep every product name available. It is useful purchasing information, but the combination still needs to be assessed for the room and fitting method. Ask for the proposed underlay to be identified in the quotation.

Check moisture protection for the actual base

Concrete, screed and timber bases can require different considerations. The product instructions establish which supporting layers or moisture-control arrangements are needed and how they should be used. A surface that looks dry is not a complete moisture assessment.

Explain the construction you know about and any history of damp or recent wet works. The fitter can discuss the relevant checks before specifying the floor build-up. Avoid adding an improvised layer simply because it is described as protective.

Pale grey floor beside two-tone kitchen cabinetsPale grey plank flooring spans the space in front of an L-shaped kitchen, meeting grey lower cabinets, a black oven and tall white cupboards.

Bring heating and acoustic conditions into the choice

If the room has underfloor heating, the floor and underlay must be considered with the heating system’s requirements. In a managed flat, obtain the actual flooring or acoustic conditions before choosing the supporting products. A laboratory rating on a roll does not automatically establish approval for your building.

Send the written information rather than relying on a neighbour’s previous installation. Product compatibility, whole-system performance and any required building consent are separate checks that the fitting brief needs to connect.

Do not double layers or reuse blindly

Some floors have an integrated backing or specific instructions about permitted additional support. Adding more underlay can conflict with those instructions, even if the intention is extra comfort. Existing carpet underlay should not be presumed suitable for laminate.

Have the complete product combination checked before cutting or ordering supporting materials. A useful quote explains the selected floor, base preparation, supporting layers and edge detail so the finished result is planned as one system.

Make the next step easier

Keep these details together.

  • Keep the floor and proposed underlay product names together.
  • Check the base and necessary moisture provision.
  • Share heating and any written building acoustic conditions.
  • Follow integrated-backing and extra-layer instructions exactly.

More questions about this topic.

How do I choose the right underlay for my laminate?

Start with the exact laminate instructions, then match the permitted support to the base and room. Include moisture protection, heating and any building acoustic requirements before purchasing a product on thickness or softness alone.

Can I reuse carpet underlay beneath laminate?

Carpet underlay is not automatically suitable for a laminate system. Identify it and the new flooring before planning reuse. The selected laminate needs the support its manufacturer permits for the actual base.

Is thicker laminate underlay always better?

No. Extra softness or thickness does not necessarily provide the support the joints require. Choose a permitted product for the actual installation rather than assuming the thickest roll improves comfort, sound or performance.

Can underlay correct dips or ridges in the base?

It should not be used to avoid specified preparation. The base needs to meet the laminate's conditions before the permitted underlay is installed. Have irregularities assessed rather than trying to compensate with extra foam.

Does laminate over concrete need moisture protection?

Check the laminate and supporting-product instructions for the actual concrete or screed. Its moisture condition needs establishing, and any required protection must form a compatible build-up. Appearance alone does not confirm the correct arrangement.

Does a laminate floor with attached backing need extra underlay?

Follow that range's instructions before adding anything. An integrated layer can change the permitted build-up, and an additional roll is not automatically beneficial or compatible with the board system.

Can two layers of underlay make laminate quieter?

Do not double layers without a permitted specification. Extra cushioning can conflict with the flooring requirements, and it does not establish acoustic approval. Assess the complete floor build-up against the relevant product and building conditions.

What underlay should I use over underfloor heating?

Use one compatible with both the chosen laminate and heating system. Their thermal requirements apply to the combined layers, so gather the actual product data before selecting a roll described broadly as suitable for heating.

Will an acoustic underlay guarantee approval for a flat?

No. Obtain your building's written conditions and identify who accepts the proposed floor build-up. A rating on an underlay describes particular test conditions; it does not by itself approve the complete installation at your address.

Should laminate underlay be included in the fitting quote?

Ask for it to be named, with any moisture provision and base preparation. Alis's standard laminate fitting figure is £14/m²; the written quote should confirm which supporting products and other tasks are included.

Further reading and product guidance

The references below explain the relevant checks. The instructions for the actual product and property determine the specification.

From reading to your own room

Choose the supporting products with the floor.

Tell Ali the laminate range, existing base and any heating or building conditions. Discuss the complete fitting system before ordering underlay separately.

Talk to Ali · 07704 305101

Based in Poplar. Fitting floors across London and the surrounding area.

Laminate fitting

A few details.
A fitting plan for you.

Already have your flooring, need it supplied, or still choosing? We’ll start there.

No obligation. Measurements can wait.

Laminate fitting

Let’s get your floor fitted

Get your laminate quote.

Tell us what you need. We’ll take it from there.

Step 1 of 2Your floor
What are you having fitted?
What would you like us to do?

Already have your flooring, need it supplied, or still choosing? There’s a place to start.

What would you like us to do?

Fitting only and supply & fit enquiries are both welcome.

No obligation. No exact measurements needed.

Call AliGet a quote
Our work

Like this look?

Let’s find the right finish for your space.

Get a quote for this lookOr call Ali: 07704 305101
Explore more of our work