ALIS FITTINGS LTDSpeak to Ali · 8am–9pm daily07704 305101
Menu

Planning & costs

How do I measure a room before ordering flooring?

The short answer

Start with a sketch showing the whole room outline, doorways, alcoves and fixed features, then add rough dimensions to describe the space. The amount to order also depends on the chosen product, carpet width or board format, layout and cutting allowances. Use the sketch for an enquiry; have the final measured plan and quantity checked before ordering or cutting.

Grey carpet fitted across a room with a fireplace and bay-window shutters.Real Alis Fittings portfolio photography

Draw the outline before calculating the area

A room may include a bay, chimney breast, inset doorway or cupboard you want covered. Mark those shapes and label the adjoining rooms. A clear drawing with rough measurements often communicates more than a single square-metre figure because it shows where the floor starts and stops.

For an initial area estimate, a rectangular section’s length multiplied by width gives square metres when both dimensions are in metres. More complex rooms can be described as separate sections, but the sketch should preserve their relationship and any overlapping or excluded areas.

Keep floor area separate from material quantity

Carpet comes in supplied dimensions, while boards and tiles are ordered in packs or pieces. Their use within a room depends on orientation, pattern, available sizes and cuts. The measured surface area therefore does not automatically equal the amount that should appear on the order.

This matters particularly for patterned floors and carpeted landings. Ask the installer or supplier to establish the allowance from the identified product and layout. Avoid applying a universal waste percentage to every material and room shape.

A quick room estimate

Calculate a rectangular area.

Use this to describe a simple room or section. Bays, alcoves and the final material allowance still need a measured plan.

Enter the length and width.

Length × width gives the rough area. The order quantity depends on the selected product and complete layout.

Show the fixed details and connecting spaces

Identify kitchen units, wardrobes, hearths and any retained floor. Say whether cupboard interiors or areas under removable furniture are included. Photograph doorways from both sides so the new floor’s boundaries are understood alongside the numbers.

If one finish continues through several rooms, draw the connections rather than sending unrelated rectangles. Doorway breaks, product direction and installation requirements can influence the layout and quantities across the whole route.

Soft grey around a bay windowGrey carpet fitted across a room with a fireplace and bay-window shutters.

Use professional measuring before a final commitment

Alis offers free room measurements and consultation. Begin with the information you have, then discuss how the actual product and measured layout will be checked. Do not cut a carpet or make a supposedly final material order solely from an uncertain sketch.

For an existing purchase, keep the order quantity visible in the enquiry. A fitter needs to compare what is supplied with the intended coverage, not assume the order was based on the same room list you now want completed.

Make the next step easier

Keep these details together.

  • Sketch bays, alcoves, cupboard openings and doorways.
  • Label retained floors and the areas that are excluded.
  • Keep rough area and final order quantity as separate figures.
  • Confirm product format, layout and cutting allowances before buying.

More questions about this topic.

How do I calculate the square metres of a rectangular room?

Measure the length and width in metres and multiply them. Use that as an initial area estimate, while keeping a sketch of doorways and other features; it does not by itself establish the material order.

How should I measure an L-shaped room?

Sketch the complete outline and divide it into labelled rectangular sections for a rough area estimate. Keep their relationship clear and avoid counting overlapping areas twice; the final layout still needs checking against the flooring product.

Do I need to include alcoves, bays and recessed doorways?

Yes, show every part you want covered rather than measuring only the central rectangle. Mark fixed features and where flooring stops so those details can be considered when the material layout is established.

Should I measure inside wardrobes and cupboards?

Include them if their floors are part of the job, and mark that coverage explicitly. Distinguish fixed furniture from removable items so the fitter understands the boundaries and areas requiring access.

Is the room area the same as the flooring quantity I should buy?

No. Carpet width, board or tile format, pattern, direction, cuts and pack rounding can change the ordered quantity. Have the material requirement established from the identified product and measured layout.

What waste percentage should I add to my measurements?

There is no universal allowance for every material and layout. A patterned floor, irregular landing and simple plank room use material differently, so ask for an allowance based on the chosen product and actual plan.

Can I use an estate agent's floor plan to order flooring?

It can help explain how rooms connect, but should not automatically become the final fitting measure. Check actual dimensions, boundaries and product requirements before placing an order or cutting material.

How do I measure flooring that continues through several rooms?

Draw the connecting spaces and doorways together, including retained surfaces and stopping points. Product direction and installation requirements can affect the overall plan, so separate room rectangles may miss important layout details.

Do I need accurate measurements before contacting Alis?

You can start with rough dimensions, photographs and your postcode. Alis offers free room measurements and consultation, allowing the actual layout and product requirements to be checked before quantities and scope are finalised.

What if I have already ordered flooring from my own measurements?

Send the exact product and supplied quantity alongside the room sketch. Have the purchase compared with the intended coverage before opening everything or cutting carpet, especially where the room list or layout has changed.

Further reading and product guidance

The references below explain the relevant checks. The instructions for the actual product and property determine the specification.

From reading to your own room

Start with a sketch, finish with a measured plan.

Tell Ali which rooms you want to change and whether the floor is chosen. Ask about room measurements before the material order becomes a fixed assumption.

Talk to Ali · 07704 305101

Based in Poplar. Fitting floors across London and the surrounding area.

Your floor. Your starting point.

A quote that fits
what you need.

Already have your flooring or need supply & fit? Start with a few quick choices.

No obligation. Measurements can wait.

Flooring fitting

Let’s get your floor fitted

Get your flooring quote.

Tell us what you need. We’ll take it from there.

Step 1 of 2Your floor
What are you having fitted?
What would you like us to do?

Already have your flooring, need it supplied, or still choosing? There’s a place to start.

What would you like us to do?

Fitting only and supply & fit enquiries are both welcome.

No obligation. No exact measurements needed.

Call AliGet a quote
Our work

Like this look?

Let’s find the right finish for your space.

Get a quote for this lookOr call Ali: 07704 305101
Explore more of our work