Identify the base and work already carried out
Tell the fitter whether the floor is concrete, a known screed or a surface you cannot yet identify. Include repairs, recent wet works and any information about heating beneath it. Different bases and preparation systems can require different checks.
If an old covering remains, say what is still hidden rather than lifting questionable material just to complete the enquiry. The plan should distinguish what can be assessed now from conditions that only become clear after appropriate removal.
Use assessment rather than a drying rule of thumb
The elapsed time since a screed was laid does not, by itself, prove that it meets the flooring system’s moisture requirements. Room conditions and the actual materials affect readiness. A surface touch test is not a replacement for the relevant assessment.
Avoid copying a numerical limit from another range or method. Ask for the correct product-specific checks and any compatible moisture-control or preparation system to be established. The flooring and supporting materials need to be specified together.
Confirm the fitting method for the selected board
An engineered product’s permitted methods may differ from another board. Read the current instructions and identify the compatible components for the proposed installation. The fact that the visible surface is timber does not settle how it should be fitted to your base.
Perimeter details, heating and room connections still need planning. Show fixed features and adjoining floors, and explain the desired finish at each boundary. Preparation beneath the boards and appearance at the edges are parts of the same installation scope.
Keep readiness connected to the timetable
If further drying or preparation is required, fitting arrangements need to reflect that dependency. Tell the team about your target date, but keep it separate from a confirmed appointment based on the correct material and room conditions.
With Alis, you can send the engineered range you already bought or ask about supply. Include the full postcode, base information and photographs. The next useful step is establishing what the floor needs, rather than assuming concrete automatically means either immediate fitting or a fixed standard treatment.
Make the next step easier
Keep these details together.
- Identify the base, repairs and heating information available.
- Use the relevant moisture and condition assessment.
- Confirm the board’s fitting method and compatible supporting system.
- Agree preparation and readiness before relying on a date.
More questions about this topic.
Can engineered wood flooring be fitted over concrete or screed?
Potentially, if the base and proposed installation meet the exact product's requirements. Establish the substrate type, condition, moisture position and preparation with the fitting method and compatible supporting products before committing to the work.
How soon can engineered wood go over a new screed?
Use the relevant assessment and system requirements rather than a universal drying timetable. Screed age, room conditions and the actual materials all matter. A dry-looking surface does not by itself confirm readiness for wood flooring.
Does old concrete still need a moisture assessment?
Its age alone does not establish suitability. The current moisture position and condition need considering against the chosen floor and installation system. Mention damp history, repairs and retained layers when discussing the relevant checks.
Can I put underlay and engineered boards straight over concrete?
Only use a build-up permitted by the selected board and supporting-product instructions. The concrete still needs the required condition and moisture checks. Underlay should not be used to bypass preparation or establish readiness by itself.
Should engineered wood be glued or floated over concrete?
Choose from the methods permitted for the exact product, then specify the compatible components for the assessed base. Another board's installation method is not automatic permission for yours. Include the perimeter and connected rooms in that decision.
Does every concrete floor need the same moisture-control product?
No standard treatment should be assumed from the word concrete. The substrate, relevant assessment and complete flooring system determine any required provision. Compatible preparation and supporting products need specifying together rather than selected independently.
Can engineered wood go over concrete with underfloor heating?
Check the exact board, fitting system and supporting products against the heating instructions. Preparation, moisture and any commissioning or operating conditions still apply. Supply the system details before assuming concrete and engineered wood form a compatible combination.
Can the base be fully assessed before the old covering is removed?
Some information may remain hidden. Describe the covering and known base history, then agree what can be checked now and what depends on appropriate uplift. Do not disturb questionable older material simply to expose the concrete.
How much does engineered wood fitting on concrete cost?
Alis lists straight-plank engineered wood fitting from £30/m². The complete quote needs the selected board, assessed base, preparation, supporting products and edges. Concrete does not establish either a fixed extra charge or an all-inclusive standard treatment.
What if the concrete is not ready by my planned fitting date?
Tell the fitter about the target date and any unresolved readiness checks. Further drying or preparation needs to be reflected in the sequence; the installation should proceed when the actual system requirements are met.
Further reading and product guidance
The references below explain the relevant checks. The instructions for the actual product and property determine the specification.




